MPC Renaissance and MPC Studio - Controling Instruments in Reason on OSX


?UsingMPC RenaissanceControlReason0The MPC Plugin allows users to transmit MIDI data from the plugin to a software instrument track in their DAW. For most DAW's that support VST, AU and RTAS this is relatively simple to set up. However, Reason, which does not support those plugin formats needs additional workarounds to make this kind of routing capable to control it's instruments. Sometimes it's realistic to have Reason slaved in Rewire to a DAW, that can then transmit MIDI to various instruments. Sometimes this is not practical because you don't have another DAW to Rewire. This guide will help you setup the Standalone MPC Software to transmit MIDI to Reason's instruments.


  1. Setup additional MIDI ports in the IAC bus monitor
  2. Setup additional MIDI ports in the MPC Software
  3. Setup Reason to receive MIDI data from the MPC's MIDI Mapping ports
  4. Additional Resources
  5. Further Product Support


Setup additional MIDI Ports in the IAC bus monitor
  1. Open Audio MIDI Setup Application. This application is bundled with the installation of OSX, and can be found in the HD/Applications/Utilities folder.

    UsingMPC RenaissanceControlReason1
  2. Open the MIDI Window by selecting Window, Show MIDI Window

    UsingMPC RenaissanceControlReason2
  3. Double Click the object labeled IAC Driver

    UsingMPC RenaissanceControlReason3

  4. In the IAC Driver Properties, select the check-box labeled Device is online

    UsingMPC RenaissanceControlReason4

  5. In the lower left you will see a box listing titled ports. Add 4 additional ports by selecting the + button 4 times.

    UsingMPC RenaissanceControlReason5
  6. Close the Audio MIDI Setup windows

Setup additional MIDI ports in the MPC Software
  1. Open the MPC Software
  2. Open Preferences
  3. Select the MIDI Ports added to the IAC Driver in the section titled MIDI Mapping

    UsingMPC RenaissanceControlReason6

  4. Add 4 MIDI tracks to a Sequence. Each track should have 1 of the MIDI Mapping ports selected.

    UsingMPC RenaissanceControlReason7UsingMPC RenaissanceControlReason8
  5. Keep the MPC Software open

Setup Reason to receive MIDI data from the MPC's MIDI Mapping ports
  1. Open Reason with a blank
  2. Go to Preferences
  3. Select Advanced
  4. Under External Control add the MIDI ports from the IAC driver, and MPC MIDI Mapping ports to individual Bus ports.

    UsingMPC RenaissanceControlReason9
  5. Close Preferences
  6. Add 2 instruments to your song. I suggest Thor and SubTractor
  7. Expand the Hardware Interface and select Advanced MIDI

    UsingMPC RenaissanceControlReason10

  8. You will notice that Bus Select sections A - D now show the ports that you have selected in Reason's Preferences
  9. Based on the MIDI Channels selected on Tracks in the MPC Software select Reason's devices

    UsingMPC RenaissanceControlReason11

  10. Play your MPC's pads or Sequences and they will now trigger instruments in Reason

Additional Resources

You can find a number of additional articles and videos in our knowledge base:


Further Product Support

Whether you are a customer or dealer, if you already own an Akai Pro product, or if you just have pre-sales questions, the Akai Pro technical support team is available to help!

Visit the link below to connect with any of the following support options: online community support, phone support, email support.