Akai MPX8 - Triggering Samples With An External MIDI Controller

akai mpx8 and editor faqThe Akai MPX8 is a mobile SD sample player that allows a user to load virtually any sample via standard SD or SDHC card and assign it to any of the MPX8’s eight backlit velocity- and pressure-sensitive pads.  This article walks through triggering samples on the MPX8 with an external MIDI controller.

 

 Contents 

 

Triggering Samples With An External MIDI Controller

  1. Connect the MIDI Output of your MIDI controller or MIDI interface to the MIDI Input on the MPX8 using the supplied 1/8" to 9 pin MIDI connector.
     

  2. Make sure that your MIDI controller or software is set to output on CH 10. If you are unsure of how to do this, consult the reference manual for your controller or software. This step is very important, as the MPX8 will only accept messages from MIDI CH10.
     

  3. By default, KITs on the MPX8 occupy MIDI notes 36-43 (C2, C#2, D2, D#2, E2, F2, F#2, G2).

    akai mpx8 triggering externally noteassignments
     

    Playing these notes on a controller or from software will thus trigger the corresponding pads on the MPX8.

 

It is also possible to change the note assignments for the MPX8's pads.  To do so, follow the steps suggested below:

  1. To re-assign the MIDI note for a pad on the MPX8, press the pad you want to edit.
     
  2. Use the SELECT +/- buttons to navigate to the MID option.
     
  3. Use the DATA wheel to change the MIDI note required to trigger the selected pad.

    akai mpx8 triggering externally lcdscreen

 

 

Warranty and Technical Support Information

Whether you are a customer or dealer, if you already own an Akai Pro product, or if you just have pre-sales questions, the Akai Pro technical support team is available to help!

Visit the link below to connect with any of the following support options: online community support, phone support, email support.