AKAI Professional

Akai Pro MIDImix - Setup with Logic Pro X

Rate this article

Article updated 06-28-2017

MIDImix is a portable compact high-performance mixer that has the unique ability to control your Digital Audio Workstation.  This article walks through how to set up and map out the MIDImix with Logic Pro X.



  1. Getting Started
  2. Loading the Logic Pro X Preset
  3. Installing the Control Surface Preference File
  4. Current Mapping Assignments
  5. Additional Mapping Resources
  6. Further Technical Support


Getting Started

For your convenience, we've put together a preset file and Logic Pro Control Surface Preference File to easily map the controller to paramters in Logic Pro X. The files can be downloaded through the link below:

Keep in mind, this will come in a zipped folder. Please make sure to double-click on the folder to unzip it once it has completed downloading.

In order to load the preset file onto the MIDIMix, you will also want to download and install the MIDIMix Editor. You can download the editor directly from the link below:


Loading the Logic Pro X Preset
  1. Connect your MIDIMix to a USB port on your computer and power it on.
  2. Close all other Audio/MIDI software, including Logic and launch the editor.
  3. From the top left of the editor window, select File > Open Preset.

  4. In the window that opens, locate the MIDIMix_LogicProX folder (this is likely in your downloads folder) and select the file MIDImix_LogicProX preset file inside. 

  5. A new window will appear for the new preset. In the new window, select File > Send to Hardware.

    Important note: Sending a new preset to the hardware will replace all current parameter assignments on the MIDIMix. If this is important, please make sure to back up your preset first. Follow our Akai Pro MIDIMix - Using the Editor guide for more information on receiving and saving presets from the MIDIMix.
  6. If asked to select your MIDI ports, choose the MIDImix option in the Output section and click Apply and OK.

Your preset should now be loaded and you are ready to install the control surface preference file! For more information on useing the MIDIMix Editor, please be sure to go through our Using the Editor guide.


Installing the Control Surface Preference File

Important: In order to share a mapping profile for Logic Pro X, the control surface preference file must be replaced. This will overwrite any "learned" control assignments previously made in Logic Pro X.

  1. Close Logic Pro X.
  2. Open a finder window and click on Go at the top of your screen.
  3. Hold down the Option key and click on Library when it appears in the list.
  4. In the window that appears, navigate into the Library and find the Preferences folder.
  5. Find the com.apple.logic.pro.cs file in your MIDIMix_LogicProX folder and drag it into this Preferences folder. This should replace an existing file of the same name in this folder. If given the option, make sure to select Replace and not Rename.

Now, you should be able to open Logic and it will automatically load this new preference file. Once it's loaded (this may take a few seconds), you should start to see response from the faders, knobs and buttons. To check the current assignments in Logic, navigate to Logic Pro X > Control Surfaces > Controller Assignments. Click on the Expert view and the window should look something like this:


Current Mapping Assignments
MIDIMix Logic Pro X
Faders 1-8 Track Volume 1 - 24 
Master Fader Master Volume
Rec Arm None/User Assignable**
Mute Track Mute 1 - 24
Solo Track Solo 1 - 24
Bank Left Moves controlled bank left by 8 tracks
Bank Right Moves controlled bank right by 8 tracks
Knobs (Bottom) Track Pan 1 - 24
Knobs (Middle) None/User Assignable*
Knobs (Top) None/User Assignable*

* Parameters labeled as "User Assignable" were left blank to allow users to map these controls as they see fit. Some suggestions may include paramaters for instrument or effect plugins, track EQ settings, or Track sends. See the Additional Mapping Resources section for more info on mapping these out on your own.

** Logic Pro X does not offer the track record arm function as MIDI assignable. The buttons were left unassigned to allow the user to decide how best to utilize them.


Additional Mapping Resources

The scope of your project may grow larger than the provided mapping or you may find that the mapping does not meet your personal needs. Maybe you want to assign the extra knobs to your favorite EQ or maybe you'd like to assign the REC ARM buttons as your transport. Not to worry! Logic offers plenty of resources to edit the current map, build off it and even create your own mapping just through using their MIDI Learn features and the Contoller Assignments menu. We've gathered a few resources to help you dive into this on your own:


Further Technical Support

Whether you are a customer or dealer, if you already own an Akai Pro product, or if you just have pre-sales questions, the Akai Pro technical support team is available to help!

Visit the links below to see our other MIDIMix guides or connect with any of the following support options: online community support, phone support, email support.