- My Account
Combining the might of a pro-level piece of production gear truly fit to carry the MPC shield with the tactile ease of use found on smartphones and tablets, the Touch is truly a workflow revolution. It incorporates the ease of a touchscreen right on the device for quicker production. This guide thoroughly walks through the installation procedure.
For successful use of the MPC Touch, there are multiple components to install such as the MPC Software, DisplayLink drivers, etc. To make this process a bit easier to do, we have made a video walkthrough of the whole installation process you can follow along with:
You will notice an RTAS is no longer supported error message come up after choosing "Update MPC Software" but this will not disrupt your installation. This is simply a disclaimer to let you know that the older Pro Tools plugin format, RTAS, is not included with this installer. This is only recommended for customers running Pro Tools 10.3.7 and up. If you have an earlier version, you will need to update Pro Tools in order to use the latest MPC software plugin in Pro Tools.
Once you move past this informational window, the update wizard opens. Follow the suggested steps as shown in the screenshots below.
Once the wizard completes, you will see the update notes. Choose Close, and restart your computer.
Once you restart your computer, run the updater again. The initial installation window will prompt you to begin the next section that you have not yet installed. Choose Install Audio/MIDI Driver.
Once this installer completes, you may need to restart the computer. Follow the prompts to do so if necessary.
Run the updater again. The initial installation window will prompt you to begin the next section that you have not yet installed. Choose Install Touch Driver. Follow the suggested steps.
Once the installer completes, follow the prompts to restart your computer.
Once you restart your computer, run the updater. The initial installation window will prompt you to begin the next section that you have not yet installed. Choose Install Display Driver. Follow the suggested steps to install the Display driver.
Note the Important message that appears. Once the DisplayLink driver begins to install and asks you to attach the device, the Important window tells you NOT to connect the device at this time. This is a very important step to follow.
Press OK in the Important window to begin the display driver installation. Follow the suggested steps.
Once the drivers install, you will need to reboot your computer.
After you complete the reboot, you are ready to configure your screen. Run the updater once more. The initial installation window will prompt you to begin the next section that you have not yet installed. Choose Configure screen. Follow the prompts to configure the MPC Touch screen.
You will need to reboot your computer one final time. After this restart, you are ready to use the MPC Touch!
This process will require an internet connection. If you are not currently connected to the internet, see the next section on using the Offline Software Unlock Process.
If your computer is not currently connected to the internet, follow these additional steps instead of Step 5.
All setup and ready to make some noise? Check out our other videos and tutorials below for more on MPC basics, using key MPC Touch features and tips on producing with an MPC Touch:
Whether you are a customer or dealer, if you already own an Akai Pro product, or if you just have pre-sales questions, the Akai Pro technical support team is available to help!
Visit the link below to connect with any of the following support options: online community support, phone support, email support.