AKAI Professional

Akai Professional Rhythm Wolf - Frequently Asked Questions


Rate this article

Article updated 06-27-2017

 

akai rhythm wolf mainThe Akai Professional Rhythm Wolf combines a drum machine, bass synthesizer, and step sequencer into one rugged device with a fierce, 100% analog signal path. This article walks through some Frequently Asked Questions about the Akai Professional Rhythm Wolf.

 

Frequently Asked Questions

 

 

Sometimes my Rhythm Wolf goes a little sharp or flat. Is this normal?

Yes. Because the Akai Rhythm Wolf is an analog synthesizer, it is susceptible to changes in the environment, like temperature. This can result in slight variations in the tone of each drum sound, or the pitch/intonation of the BASS SYNTH. 

First, we recommend letting the Rhythm Wolf warm up for 15 minutes before using for music and to ensure the best tuning. Then, if your BASS SYNTH requires further tuning, download and run Akai's free Rhythm Wolf Tuning Utility

The instructions to walk through the tuning process are included right in the software. The amount of time the program will take to tune can vary, although it will normally be less than 10 minutes. Intonation may still vary over time or due to environmental changes, so you can rerun the tuning utility when necessary.

 

The KICK DRUM is hard to hear on my speakers. It’s better on headphones, though. What can I do?

The Rhythm Wolf kick drum is capable of some very deep bass tones; so deep that some smaller desktop speakers will not be able to reproduce them! If you did not have a subwoofer or a set of headphones to use with your Rhythm Wolf, you can make the KICK DRUM play some higher, punchier tones by turning the TUNE, and ATTACK knobs up.

 

Why does the BASS SYNTH get quieter as I turn up the FILTER RES knob?

The Rhythm Wolf BASS SYNTH uses a Low Pass Filter. Naturally, these filters remove high frequencies as you turn down the FILTER CUTOFF knob. FILTER RES (Resonance) accentuates different parts of this filter so you can get a wide variety of tones from your Rhythm Wolf’s synth.

At extremely high settings, the FILTER RES knob will seemingly reduce the volume of the BASS SYNTH tone. This is normal and was designed specifically to allow for a very musical interaction between the BASS SYNTH filter and the HOWL knob. Experiment with different combinations of filter settings along with the HOWL and come up with your own signature tone!

 

Why can't I hear the BASS SYNTH?

If the SYNTH OUT is not connected to anything, the MAIN OUT will include the drum and bass synth voices. If a cable is connected to the SYNTH OUT, the MAIN OUT will include the drum voices only.  In other words, the bass synth voice is sent through SYNTH OUT only if a cable is connected to it. Otherwise, the bass synth voice is sent to the MAIN OUT.

Be sure that you have correctly connected the MAIN OUT and SYNTH OUT.  If you have connected your headphones directly to the MAIN OUT, and want to hear the BASS SYNTH, ensure that nothing is connected to the SYNTH OUT port.

If you continue to have difficulty, contact Akai Technical Support.

 

Can I record my audio directly to the computer with a USB cable?

The USB connection is specifically for transferring MIDI and timing information between the computer and the Rhythm Wolf only.

 

Additional Resources

 

Further Technical Support

Whether you are a customer or dealer, if you already own an Akai Pro product, or if you just have pre-sales questions, the Akai Pro technical support team is available to help!

Visit the link below to connect with any of the following support options: online community support, phone support, email support.