Akai MPC5000 - Using the frequency shifter for huge chorus and stereo effects
Frequency Shifter is an effect that has been around for a long time, but fell out of favor in the late 1970s. Today, producers are rediscovering this effect that does NOT do what its name implies. A frequency shifter does not function as a pitch shifter; it creates a harmonic shift. In small does, using frequency shifter can sound like a nice stereo chorus. In larger amounts, the effect takes on more of a ring modulator character. This tip will enable you to use frequency shifter as a stereo chorus that will make whatever you put into it sound huge!
- Load a factory-preset VA Synth program. Choose one of the pads, poly-synths, or a lead sound.
- Go to the MAIN page and choose the Bright String preset program. Play the sound and listen to it carefully.
- Press MODE + MIX.
- Set the Send to effects 1 to max. Press F6 (go to FX).
- Move the cursor to the DIRECT:ON parameter and set it to OFF. This will make effects bus 1 function as an insert instead of a send.
- Go to the first effects slot and select FREQUENCY SHIFTER.
- Press WINDOW and check that your effect has been applied.
- The sound already has a much bigger feel.
- Adjust the frequency parameter using Q-Link Q10, setting the value to about 67.
- Now you have a very large stereo sound that doesn't sound like a standard chorus effect.
- Change the frequency parameter to a higher value and listen to effect you get.
- Play with the pan controls and the A Gain/B Gain controls to hear some of the other possibilities of Frequency Shift. Process some beats as well as vocals to hear the effect you get.
Akai Technical Support & Warranty Service
Whether you are a customer or dealer, if you already own an Akai Pro product, or if you just have pre-sales questions, the Akai Pro technical support team is available to help!
Visit the link below to connect with any of the following support options: online community support, phone support, email support.